Wishbone B3总路线Generic RAM写法

  1 /*
  2 ************************************************************************************************
  3 *    File   : ram_wb.v
  4 *    Module : ram_wb
  5 *    Author : Lyu Yang
  6 *    Data   : 01,01,1970
  7 *    Description : wishbone generic ram
  8 ************************************************************************************************
  9 */
 10 
 11 // synthesis translate_off
 12 `timescale 1ns / 1ps
 13 // synthesis translate_on
 14 `timescale 1ns / 100ps
 15 module ram_wb (
 16     clk_i,
 17     rst_i,
 18     cyc_i,
 19     stb_i,
 20     we_i,
 21     sel_i,
 22     adr_i,
 23     dat_i,
 24     dat_o,
 25     cti_i,
 26     ack_o
 27 );
 28 
 29 parameter adr_width = 10;
 30 parameter mem_size  = 1024;
 31 
 32 // clock
 33 input                   clk_i;
 34 // async reset
 35 input                   rst_i;
 36 
 37 // wishbone signals
 38 input                   cyc_i;
 39 input                   stb_i;
 40 input                   we_i;
 41 input   [3:0]           sel_i;
 42 input   [adr_width+1:0] adr_i;
 43 input   [31:0]          dat_i;   
 44 output  [31:0]          dat_o;
 45 input   [2:0]           cti_i;
 46 output  reg             ack_o;
 47 
 48 wire [31:0]          wr_data;
 49 
 50 // mux for data to ram
 51 assign wr_data[31:24] = sel_i[3] ? dat_i[31:24] : dat_o[31:24];
 52 assign wr_data[23:16] = sel_i[2] ? dat_i[23:16] : dat_o[23:16];
 53 assign wr_data[15: 8] = sel_i[1] ? dat_i[15: 8] : dat_o[15: 8];
 54 assign wr_data[ 7: 0] = sel_i[0] ? dat_i[ 7: 0] : dat_o[ 7: 0];
 55 
 56 ram #(
 57     .dat_width(32),
 58     .adr_width(adr_width),
 59     .mem_size(mem_size)
 60 ) ram0 (
 61     .dat_i(wr_data),
 62     .dat_o(dat_o),
 63     .adr_i(adr_i[adr_width+1:2]), 
 64     .we_i(we_i & ack_o),
 65     .clk(clk_i)
 66 );
 67 
 68 // ack_o
 69 always @ (posedge clk_i or posedge rst_i)
 70 if (rst_i)
 71     ack_o <= 1'b0;
 72 else if (!ack_o)
 73     begin
 74         if (cyc_i & stb_i)
 75             ack_o <= 1'b1;
 76     end  
 77 else if ((sel_i != 4'b1111) | (cti_i == 3'b000) | (cti_i == 3'b111))
 78     ack_o <= 1'b0;
 79     
 80 endmodule
 81 
 82 //////////////////////////////////////////////////////////////////////////
 83 module ram
 84 (
 85     clk,
 86     we_i,
 87     adr_i,
 88     dat_i,
 89     dat_o
 90 );
 91 
 92 parameter adr_width = 10;
 93 parameter dat_width = 32;
 94 parameter mem_size  = 1024;
 95 
 96 input [dat_width-1:0]      dat_i;
 97 input [adr_width-1:0]      adr_i;
 98 input                        we_i;
 99 output reg [dat_width-1:0] dat_o;
100 input                      clk;   
101 
102 reg [dat_width-1:0] ram [0:mem_size - 1];
103 
104 initial $readmemh("data.txt", ram);
105 
106 always @ (posedge clk)
107 begin 
108     dat_o <= ram[adr_i];
109     if (we_i)
110         ram[adr_i] <= dat_i;
111 end 
112 
113 endmodule // ram
114